Unique PU suction pad will adhere to just about any clean dry surface and can be removed and re-applied.
10cm arm & 65mm clear PU suction cup - will not leave residue or damage sound surfaces.
How does it works?
We have taken our most popular lever release arm and have incorporated the new PU suction cup.
This PU suction pad is sticky to touch but it's NOT adhesive.
Press the arm's suction cup against a clean dry surface and push down the lever release arm.
This creates a vacuum in the usual way but because of the new PU base, it will hold to both smooth and most textured surfaces on both horizontal or vertical plains.
Use on Glass & smooth on textured dashboards (best suited to hard dashes / consoles rather than covered)
Allow a flat area of approx 70mm for the suction cup to stick.
Always check the mount is secure by giving it a wiggle before inserting your device.
Adjustable cradle: Suitable for use with or without a case. Fits sizes: Height: 65mm + (65mm is the minimum height the mount fits) Width: Fits phones from 40mm (min) to 88mm (max).
Button release arms are cushioned and have a retaining lip to keep your phone securely in place.
To remove first lift lever then gently pull & lift the removal tab. This breaks the vacuum.
A gentle rocking motion while lifting the removal tab works best.
Please don't just pull at the mount, it wasn't designed to be removed that way.
If you experience problems adhering this mount to a surface please check these steps:
Ensure area is flat enough to take the suction cup completely & aea is dry, free from grease, oil dust, ash, hair etc. Not suitable for oiled surfaces.
If the suction cup becomes soiled, rinse under the cold tap & leave to air dry to reactivate the super grip PU coating.